Boom Crane Grease
Crane operations typically involve lifting and moving heavy objects and cargo with tonnage sometimes weighing beyond 1,000 tons. While such operations are carefully planned and orchestrated, the machine elements are subjected to immense stress and need to perform flawlessly and with precise synchronization. The telescopic segments that form central part of the crane absorb extreme surface pressure during actual operations. Smooth movement of these telescopic tubular segments is directly related to the health of the lubricating film on the segments.
High Performance Greases for
Telescopic Boom Crane
Multipurpose paste e.g. for live ring in rotary kilns, spray able, excellent wear protection, very high high ignition temperatures, prevents stick slip, extended re-lubrication intervals, excellent adhesion, substances resistant, contain PTFE. Berulub PAL 1 can be applied by brush, spatula, roll or spraying system.
|Product||Base Oil||Service temperature||Thickener||Send Your Queries|
|Berulub PAL 1 ||Ester||-40 to 150||Polytetrafluoroethylene (PTFE)|
Berulub PAL 1 is a high performance synthetic adhesive grease that is designed and recommended for heavy duty telescopic boom crane applications. Formulated with ester as base oil, PAL 1 is highly viscous and extremely adhesive. The additive package includes the optimum combination of antioxidant additives, anti-wear additives and anti-corrosion additives. Berulub PAL 1 also has a high dose of PTFE (Polytetrafluoroethylene) that provides continuous film for extended duration and thereby longer service life.
Recommended by Terex, Grove and Liebherr, Berulub PAL 1 is the preferred global choice of lubricant for telescopic tubes of heavy duty cranes.
- Provides excellent lubricity with minimum quantity
- Minimal wear of boom parts even after repeated sliding
- Extended re-greasing intervals because of adhesive property
- Less downtime for maintenance because of less wear and longer greasing intervals
- Designed to work under very high and low temperatures as well as wet and dry environments
|Service Temperature ℃||-40 to 150|
Also available in NLGI 3
Applications and Properties
The role of coolant is critical in achieving higher efficiencies and productivity levels in metal working processes. The basic function of a coolant is to reduce friction between tool and work piece as well as to reduce and dissipate heat in the machining area. Knowledge of the dynamics involved in tool work interface, resultant frictional, tangential forces as well as behaviour of the fluid when exposed to elevated temperatures and pressures are imperative in formulating the right coolant.
Compatible with plastic
Resistant to water
Frequently Asked Questions
Short bytes for queries on lubricants that always bothered you
Greases are made by mixing a solid material, called a thickener, with a base oil and property enhancing additives; but it’s the oil that forms the lubrication film. For better understanding, grease thickener can be thought of as a sponge saturated with oil. Moving parts squeeze the oil out of the sponge like thickener for forming the lubrication film. Typically, the base oil constitutes the largest proportion of grease weight at about 80-90%, followed by thickener at 10 to 20% and additives under 10%.
Dropping point of a lubricating grease is an indicator of the heat resistance of the grease. and is the temperature at which the grease is no more a thickened lubricating medium. The dropping point indicates the upper temperature limit at which a grease retains its structure, not the maximum temperature at which a grease may be used.
Few greases have the ability to regain their original structure after cooling down from the dropping point.
The most important feature of a grease is its consistency. A grease that is too stiff may not get pumped into areas requiring lubrication. While a grease that is too fluid may leak out. Grease consistency depends on the type and amount of thickener used and the viscosity of its base oil. A grease consistency is its resistance to deformation by an applied force.
The measure of consistency is called penetration. Penetration depends on whether the consistency has been altered by working. Standard test procedures established by American Society for Testing and Materials International (ASTM) and accepted by industry are ASTM D 217 and D 1403, measure penetration of unworked and worked greases.
The NLGI has established consistency numbers ranging from 000 to 6, corresponding to specified ranges of penetration distance of the standard cone into the test grease. Table below lists the NLGI grease classifications along with a description of the consistency of each classification.
Viscosity: It is a measure of resistance to flow of a lubricating oil.
Viscosity index: It is defined as rate of change of viscosity with respect to temperature.
- It is the most important property which determines the performance of lubricating oils under the influence of temperature
- A lubricating oil should have sufficient viscosity to retain a lubricating film on the surface
- On machine part moving at slow speeds under high pressures, a high viscous oil should be used as it better resists being squeezed out from between the rubbing parts. Light oils can be used for lower pressures and high speeds.
- It is not possible to maintain a liquid oil film between two moving or sliding surfaces if the viscosity is too low and hence excessive wear will occur.
The pour point of an oil is the minimum temperature at which the oil turns into semi solid and almost losses its flow characteristic. At low temperatures, the viscosity of the oil will be very high, causing the oil to resist flow. This is important in equipment that operates in a cold environment or handles cold fluids.
Check out the latest case studies, product updates and news from BECHEM India
SummaryArticle NameSynthetic High Speed Spindle Bearing GreaseDescriptionHigh speed bearing grease – Berutox FB 22 – Synthetic High Speed Spindle Bearing…