Closed Gearboxes & Circulation Systems
High Performance Lubricants for Cement Industry
BECHEM’s range of mineral and synthetic oil based gear oils offer superior performance by reducing power losses and providing extended life in circulation systems and gearboxes. Some of these applications in Cement plants are,
- Ball, Rod and SAG mills
- Rotary kilns, Coolers and Dryers
- Vertical Roller mills and Roller presses
- Hydraulic and Bucket Wheel excavators and draglines
- Crushers, Stacker and Re-claimer Systems, Conveyor systems
- Cranes, Winches, Hoists and Spreader systems
BECHEM's synthetic oils for industrial gearboxes and circulation systems
Berusynth EP series are Polyglycol based, high quality synthetic gear oil available from ISO VG 68 to 1000 with service temperature range of -30˚C to +180˚C. Berusynth EP range of gear oils provide excellent oxidation and shear stability, superior load carrying capacity and wear protection. With very high ageing resistance, Berusynth EP series allows for extended oil changing intervals.Possesses good viscosity-temperature behaviour. The gear oil series with reduced coefficient of friction results in lower sump temperatures, minimum power loss and extended oil change intervals.
Applications: These specially formulated gear oils are recommended for heavily loaded spur gears, bevel gears, spiral and worm gears in rolling mills, paper mills and textile manufacturing units. Berusynth EP range also provide superior results in roller and plain bearing applications where operating temperature are constantly above 100˚C.
Please consult a BECHEM Application Engineer for selection of the suitable grade of ‘Berusynth EP’ series for your application.
| Berusynth EP Series (68 – 1000) |
|
|---|---|
| Base Oil | Polyglycol |
| Type | CLP – PG |
| Temp Range °C | -30 to +140 -25 to +180 |
Berusynth GP series are Polyalphaolefin based high performance synthetic gear oils available from ISO VG 69 to 1000 with good viscosity temperature behaviour. Berusynth GP range of gear oils provide excellent oxidation, shear stability, superior load carrying capacity and wear protection. With very high ageing resistance, Berusynth GP series allows for extended oil changing intervals.The gear oil series with reduced coefficient of friction results in lower sump temperatures, minimum power loss and extended oil change intervals.
Applications: These specially formulated gear oils are recommended for heavily loaded spur gears, bevel spiral and worm gears in rolling mills, paper mills and textile manufacturing units. Berusynth GP range also provide superior results in roller and plain bearing applications where operating temperatures are constantly above 100 °C.
Please consult a BECHEM Application Engineer for selection of the suitable grade of ‘Berusynth GP’ series for your application.
| Berusynth GP 68 |
|
|---|---|
| Base Oil | PAO |
| Type | CLP – HC |
| Temp Range °C | -30 to +140 |
| Berusynth GP 150 to GP 460 |
|
|---|---|
| Base Oil | PAO |
| Type | CLP – HC |
| Temp Range °C | -35 °C to +150 °C |
| Berusynth GP 1000 |
|
|---|---|
| Base Oil | PAO |
| Type | CLP – HC |
| Temp Range °C | -25 °C to +180 °C |
Benefits for your Application
OEM Approved Open Girth Gear Lubricants
- Priming, repair and running-in lubricants
- Graphite based services lubricants
- Viscosity of 490 cSt, 1050 cSt and 2500 Cst
- High viscous semi-synthetic transparent lubricant Viscosity of 17800 Cst.
Performance Lubricants for Specialised Areas
- Roller press grease
- Kiln tire lubrication
- Motor bearing grease
- Synthetic (Polyglycol and Polyalfaolefin) gear oils
- Multipurpose grease for cooler and pre-heater fan bearing
Our Cement Plant Expertise
Get the Edge, Experience BECHEM’s Proven Technical Services
- Vibration reduction assessment of pinion counter shaft bearings.
- Periodic monitoring of equipment evidenced by comprehensive and regular inspection reports.
- Ensure efficient functioning of spray systems even in harsh temperatures.
- Specialised consultancy for mechanical alignment
- Programme ensure training of maintenance engineers for preventive measures and troubleshooting
- Experienced and dedicated team supported by wide distribution network. Benefit from vast knowledge repository and global best practice.
- Instant gear refurbishment by skilled technicians
- Pitting dressing, wear steps and undulation removal, removal of fins etc.
Heavy Duty Lubricants
BECHEM’s range of heavy duty greases formulated with high base oil viscosity and equipped with anti wear and EP additives ensure consistent, high strength lubricant film under boundary and mixed condition.
You may also be interested in:
Kiln Live Ring Lubrication
BECHEM’s range of lubricants for floating live rings in rotary kilns
Latest Blog Updates
Enhancing operational reliability of Vertical shaft impactor (VSI) crushers with effective lubrication
Vertical shaft impactor (VSI) crushers, widely used in the construction and mining industries, are uniquely designed for high-impact crushing. The crushers are suitable for a wide range of applications including…
Challenges in lubrication of bearings exposed to high temperatures.
Case study on impact of high temperatures and loads on lubrication and therefore life of plummer block bearings in the drying range of a textile spinning mill. The drying range…
How effective lubrication of conveyor chain can impact process efficiency even at high temperatures?
Chains in drives and conveyors are highly stressed components in production lines as they typically endure harsh operating conditions like high temperatures, high load, dusty environments etc. High friction is…
Improving operational reliability of auger with synthetic food grade grease
Food and pharma processing industries adhere to a highly systematized process workflow having strict hygiene standards and food safety regulations. Methodical cleaning and regular sanitization of equipments are part of…